Lyngdorf Audio MP-60 Owner's Manual page 14

Default postprocessing
Select the postprocessing mode, which is found most suitable for content on this Source
Default voicing
Select the voicing for this source, which is found most suitable for content on this Source
Video input
Select the input connection for this Source
Trigger out
Choose which trigger output to activate when using this Source. (The interface for controlling the triggers is
found in the Trigger Setup under System Configuration)
Preset vTuner station
Selects stored presets of the vTuner Internet radio station. (The interface for controlling the built-in media
streamer with vTuner is found in the bottom section of the HOME page)
To save changes, you must press "SAVE" after making changes to each source. Do not
Arrange Sources
Change the order through Screen Setup menu by:
•
Highlighting it
•
Moving it out of the stack by pressing right on the remote
•
Moving the source by pressing up/down
•
Reinserting it by pressing left.
Change the order through website menu by:
- Grab the symbols with the mouse and move this source to the desired position
Delete Source
Delete an enabled source through Screen Setup by highlighting it and pressing right on the remote.
In the web menu press Delete button.
Lyngdorf Audio MP-60 – Owner's manual
go to the next input before saving changes.
14