Installation Via Installer Menu; Installation Via Web Interface; Home Screen - Lyngdorf Audio MP-60 Owner's Manual

Installation Via Installer Menu

Connect a screen to the MP-60 using any of the video output sockets on the back. Access the menu system
by pressing the Setup button on the remote control.
There are some differences between how the web interface and the Installer Menu. This

Installation Via Web Interface

You will need a computer, and the MP-60 must be connected to a router of an existing network.
If you do not know the IP address of the MP-60 on your local network, the MP-60 supports Apple´s Bonjour
Discovery service, which must be on the computer with which you wish to set up the MP-60. The software is
included in the Apple MAC OS operating system (not iOS devices). For Windows operating systems, the
software can be found at http://www.apple.com/support/bonjour/
•
Access the web menu by typing http://mp60.local/ in your browser.
•
Or, press the OK button on the remote. Toggling through will display the IP address.
•
Or, download the Lyngdorf Remote application. Under settings find the MP-60 connected to the
same network as the mobile device and select 'Open Device in browser'.

Home Screen

The HOME screen refers to the daily operation as performed with the remote control and displays selected
input and formats. This page shows information as to audio and video inputs and formats, and you can
control the volume level or Mute the sound. These settings will be reset to default values, when the MP-60 is
turned into stand-by mode.
You can switch between Sources, change Voicings, RoomPerfect™ focus point Post Processing as well at
activating Loudness function and adjusting Lip-sync.
Post Processing allows you to choose between following tools:
•
Dolby Upmixer / Up-mixes all type of signals to use all existing speakers using Dolby's techniques.
•
Neural:X / Up-mixes all type of signals to use all existing speakers using DTS' techniques.
•
Auro-3D Auromatic / Decodes Auro 3D signals and up-mix all type of signals to use all existing
speakers using Auro's techniques.
•
Auro-2D / Up-mixes stereo signals to use surround sound speakers using Auro's techniques.
•
Auro-Stereo / Downmix of multi-channel signals to stereo using Auro's techniques.
Lyngdorf Audio MP-60 – Owner's manual
manual describes how to set up via the installer Menu interface.
11