Rear Panel - Lyngdorf Audio MP-60 Owner's Manual

Rear Panel

On the back of the MP-60, you will find a range of inputs and outputs:
•
16 x XLR, Differential balanced audio outputs (configured for 7.1.4 plus 4 auxiliary)
•
8 x HDMI inputs and 2 x HDMI outputs, all 4K / 18 Gbps compatible. eARC on HDMI OUT 1
•
1 x HDBaseT™ output
•
2 x USB A connectors, for music file playback, backup, software updating, etc.
•
1 x Streaming USB B audio input
•
1 x RJ45 Network connector (LAN/Ethernet)
•
1 x Microphone input for the RoomPerfect™ room correction microphone
•
1 x SD card slot for storing backup data
•
3 x Inputs from external IR receivers (IR remote control)
•
1 x Trigger input and 4 x trigger outputs
•
1 x RS-232 connector for serial control of the unit
•
1 x DB-25 16 channel DCI-compliant AES3 digital input (optional upgrade)
•
1 x DB-25 16 channel DCI-compliant AES3 digital output (optional upgrade)
•
1 x RJ45 16 channel AES67-complient digital input/output (optional upgrade)
•
4 x Optical, 1 x AES/EBU and 3 coaxial digital audio inputs
•
1 x Coaxial digital audio output – stereo for Zone B (ref.: Zone 3)
Notes: HDBaseT™ is a standard for having up to 100 meter / 300 feet cable to your
television or projector. Using optical HDMI cables will require using an USB connection
for power supply, as the HDMI connector provides max. 5V/50mA.
Differential balanced output connection means that PIN 1 is Shield/Ground, PIN2 holds
audio signal and PIN 3 holds an inverted audio signal. If your power amplifier requires a
single ended (RCA) connection, you must ensure that the PIN 3 is disconnected (lifted).
Lyngdorf Audio MP-60 – Owner's manual
PIN 3 in the MP-60 connector may not be connected to ground.
8