Connecting The Drive To The Motor; Pneumatic Air Connection - LinMot PR01-52 Series Installation Manual

Installation Guide Linear Rotary Motors ENG

5.4 Connecting the Drive to the Motor

The following diagram shows the connection of the linear motor with the LinMot Drive.

5.5 Pneumatic Air Connection

G1/8 x 5 M5 x 12
All linear rotary motors of the size PR01-52 are optionally available in a hollow shaft L-version. This motor
type has a through bore of Ø 2.5 mm, which passes through the rotor and the rotary shaft. This enables the
user to implement pneumatic applications with an operating pressure of max. 6 bar. In the case of a vacuum
application, it is recommended to use a unit with sufficient power, since experience has shown that any air
coupling points generate minor losses.
The specifications of the connections are shown in the drawing above.
NTI AG / LinMot PR01-52 Page 15 / 48