Specifying The Start Settings - Dräger Atlan A300 Instructions For Use Manual

Configuration
► Set the date and time in the system setup.
The source for the time synchronization can also be set in the system setup. For
further information, see the following chapter: "Vertical tab "General"", page 176.
11.3

Specifying the start settings

As soon as a vertical tab is selected, entry of the configuration password is required
to access the settings in the System setup dialog.
Observe the information in the following chapter: "Password", page 325.
11.3.1 Adjusting the settings
The following tables show all the setting possibilities in the System setup dialog.
The respective factory defaults are marked in bold format.
11.3.2 System setup > Screen
11.3.2.1 Vertical tab "General"
Headline/
Parameter
Color scheme
Screen bright-
ness
11.3.2.2 Vertical tab "Views"
Headline/
Parameter
Rename views
Number of wave-
forms (view 3)
Default view
Save as system
defaults
166
Setting range
Day light; Day dark; Night
10 to 100
80
Setting range
1 Standard; 2 Expert; 3 Expert
3; 4
1 Standard; 2 Expert; 3 Expert
Current view
(only available during operation)
All views
Instructions for use
Description
Sets the color scheme. Observe the
information in the following section:
"Daytime colors and nighttime
colors", page 84
Sets the screen brightness.
Description
Defines the name of a view.
Touch the button for the view, enter the
new name on the keyboard, and con-
firm with the
knob.
Specifies the standard view.
Saves the current screen layout.
Saves all screen layouts.
|
Atlan A300, A300 XL, A350, A350 XL SW 1.0n
button or with the rotary