Operating concept
Setting ranges
Some settable parameters may be limited or be mutually restricted so that certain
combinations of therapy settings are not possible, e.g., Ti 6.9 s at RR 100 /min.
If a state is reached in which a parameter cannot be changed any more, the device
displays a corresponding message in the notification field (3).
5.1.4
Quick setup dialog
Depending on the parameter field or waveform, this dialog contains various setting
possibilities, e.g., for limits or scales.
Quick setup
This dialog can be opened by touching the corresponding parameter field in the
monitoring area. This dialog can be configured so that it opens automatically in the
event of an alarm, see page 170.
82
|
Instructions for use
Atlan A300, A300 XL, A350, A350 XL SW 1.0n