Table of Contents
Advertisement
5X00 Configuration and Monitoring
This chapter provides information on the 5X00's front panel, navigating menus,
and menu functionality.
The front panel - figure 4.1, is the front component of the 5X00 enclosure. The front
panel contains the 5X00 display and seven keys. Use the keys to navigate menus and
instrument system information.
Figure 4.1
This icon indicates helpful information for AquaManager users and is used through-
out this chapter. AquaManager provides access to 5X00 system information from
a PC. Most 5X00 configuration and monitoring can be done using AquaManager.
See Chapter 5 AquaManager -page 197.
Configuring the 5X00
YSI 5X00
72
With new features in this release of AquaManager, it is strongly recommended
NEW
that AquaManager be used to configure all 5X00, IOEM, REM systems and
sensor setup menus. AquaManager is required to upload IOEM mode configu-
ration to the instrument. In addition, AquaManager must be used to upload
all sensor setup>sensor system>output 4/20mA menus which menus include
configuration of IOEM slave and channel to be used for a sensor system output.
AquaManager includes software checks that help to validate IOEM 4/20mA
output assignment configuration.
Front Panel Keys
There are seven (7) 5X00 front panel keys - figure 4.1. Use
scroll and highlight menu lists and to scroll through multiple Run Screens. Use
key to select and enter highlighted submenu item and to hold one of multiple run
screens from scrolling. Hold is not an option when there is only one run screen.
Run screens can be scrolled when held by pressing
Notes:
▲
▼
-
Press and hold
and
▲
▼
-
Use
and
to scroll and view additional menu items when a scroll bar
appears to right of screen.
-
Pressing any of the four bottom keys resets any active alarm system. See
General Alarm - page 131.
Softkeys
Softkey labels appear on the bottom of the display and identify the function of the
buttons below them. Softkey labels change in different menus. Softkey labels and
corresponding softkey functions are listed in table 4.1.
Note:
-
Not all menus and screens display four softkey labels. If there is no softkey
label, that softkey has no functionality.
Configuring the 5X00
▲
▼
and
▲
▼
and
keys.
longer than one second for continuous scrolling.
YSI 5X00
73
keys to
Advertisement
Table of Contents
Troubleshooting
