Table of Contents
Advertisement
Feed Timer Troubleshooting
Issue
Understanding how the 5X00 calculates sensor reduction
time
Sensor reduction % is
The 5X00 displays temperature sensor values to the 10ths
not accurate based on
and DO values to 100ths. In reality the 5X00 temperature
display sensor value(s).
and DO sensor system values are stored at a much greater
resolution (out to 64 bits). It is the stored values, not the dis-
played values, that are used to calculate the feed timer sensor
reduction.
AquaManager Troubleshooting
Refer to AquaManager online Help for all AquaManager operation and troubleshooting
information.
Troubleshooting
YSI 5X00
224
Appendix 3 - Menu Maps
This Appendix contains the menu structure for 5X00 firmware. The menu maps
contain all menus, submenus, factory defaults, and user selectable ranges of the 5X00
firmware. Menu maps are presented in hierarchal format. All menus are accessed by
pressing
at the Run Screen. Menu maps are provided in the following order:
1. Calibration menu
2. System menu
3. Sensor Setup menu
4. Timers menu
The example below shows how to navigate the menu maps in the 5X00. First f ind
the menu you want to configure. For example, IP address for the serial to ethernet
device. Then follow the path highlighted at the top of menu. Continue to follow the
menu path under and to the right of the menu heading to access submenu;
Key strokes to enter IP address as depicted above.
1.
From the Run Screen, press the softkey below
2.
to enter System menu.;
3.
Scroll down (if necessary) to highlight communication menu;
4.
to enter communication menu;
5.
Scroll (if necessary) to highlight ethernet menu;
6.
to enter ethernet menu;
7.
Scroll down (if necessary) to highlight IP address menu;
8.
to enter IP address menu; - numeric keypad is displayed;
9.
Configure the IP address using numeric keypad;
10.
after entering IP address;
11.
to save configuration and return to run screen.
Menu Maps
label;
YSI 5X00
225
Advertisement
Table of Contents
Troubleshooting
