Database Management; Autopoller; Mapping - YSI MultiDO 5400 User Manual

Database Management

For optimal operation and safeguarding, compact and back up the AquaManager
database. Uncompacted Access database(s) may become > 1GB when polling large
networks and when polling nodes with large data logs. Compact the database from
the Explorer Window Tools>Database Maintenance>Compact Database or from
the System Wide Properties>Gen. Settings tab.
Configure an automatic weekly backup from the System Wide Properties>Database
Backup tab.
Note:
- Database Auto-Compaction must be enabled in order to access the Backup
enable box.

Autopoller

Autopoller is designed to poll node(s) at an interval specified by the user. When
the node(s) is polled, new log records and the node configuration are saved to the
AquaManager database. Autopoll must be running for the AquaManager email
and mapping to operate.
Launch Autopoll at the Explorer Window>Tools>Launch Autopoller.
AquaManager
YSI 5X00
204
The Autopoller Window opens when Autopoller is launched.

Mapping

Create a network map to display current conditions* for 5X00 nodes at PC run-
ning AquaManager. Map icons are configured to represent nodes, node systems,
and relays. Map icon images change based on system condition(s). For example, a
green icon is displayed when DO-1 is in acceptable operating range, a yellow icon
is displayed when DO-1 system is in control range (when enabled), and a red icon
is displayed when DO-1 system is in alarm range. This provides a quick visual of
system conditions at the PC.
AquaManager
YSI 5X00
205