Centrometal PelTec Series Technical Instructions page 9

1.2. FILLING AT START
Filling at start - by pressing ''START'' (1) pellet feeding screw starts to operate (2) (works 25 min),
and the burner grate (3) moves to the open position (100%) (4) to make pellets fell down in ashtray
After this process is complete pellet feeding screw stops working, the burner grate is returned to the
closed position (0%) (4). After completion of the initial filling of pellets ashtrays need to put in pellet
tank. For the duration of this process, the display shows the countdown process duration (5). Before
starting this process, it is necessary to fill the pellet tank. The process may be interrupted by pressing
button ''STOP'' or ''BACK'' (6).
1.3. SYSTEM AIRVENT
System airvent - entering the above menu, the motor device of 4-way mixing valve opens the valve
to 50%(1). By pressing START'' next to a particular pump symbol, the pump starts to work (2, 3, 4)
(button ''START'' become button ''STOP''). By pressing the button ''STOP'' the pump stops working.
In this option is possible to work 2 or 3 pumps at the same time.
Technical instructions REGULATION PelTec / PelTec-lambda
5
2
3
4
1
Filling at start, System airvent
6
1
2
3
4
9