Centrometal PelTec Series Technical Instructions page 49

ALWAYS WHEN SCHEDULE IS ENABLED (TABLE 1, 2 OR 3)
SYMBOL WILL APPEAR ON THE MAIN SCREEN
3.2. - 3.4. TABLE 1, 2, 3
Possibility of schedule is done using tables.They can be pre-set 3 tables of schedule of which only one table
can be active. It is possible for every day of the week set 3 turning-on and 3 turning-off the boiler. Turn-on is
marked by a green field and turn-off is marked with red field. You can adjust the starting times for one day and
copied the same starting times to all other days. After setting the starting times for one day you have to click on
the field that day (the whole day will be marked), on the right side will show the button ''COPY''. Press this key
(now you have copied the setting of that day and now will show button ''PASTE''). It is necessary to press the
day for which you want this settings and press the button ''PASTE''. After that, the same starting time will be
copied in the selected day. If you want the same settings for the other days, just select the desired day and
press button ''PASTE''. After filling the table with the starting times, press button ''BACK'', and press button
''CONFIRM'' for saving this settings.
1
1
Working starts
Working stops
Technical instructions REGULATION PelTec / PelTec-lambda
Button
''COPY''
Button
''PASTE''
Button
''CONFIRM''
2
Schedule
Button
''UP''
Button
''DOWN''
Button
''RIGHT''
2
49