Centrometal PelTec Series Technical Instructions page 27

2.5 / 2.8 DHW TEMP.
Possible selection:
default: 50°C
Minimum: 40°C
Maximum: 80°C
Temperature setting options of DHW (domestic hot water).
2.6 / 2.9 DIFFERENTIAL OF DHW
Possible selection:
default: 5°C
Minimum: 4°C
Maximum: 40°C
The possibility of setting domestic hot water diference.
2.1 MAX. BOILER TEMP. DHW (ONLY 69/96)
Possible selection:
default: 75°C
Minimum: 75°C
Maximum: 80°C
The possibility of setting maximum boiler temperature for DHW.
2.2 MAX. BOILER TEMP. PUF (ONLY 69/96)
Possible selection:
default: 85°C
Minimum: 80°C
Maximum: 90°C
The possibility of setting maximum boiler temperature for accumulation tank.
2.3 DIFF. BOILER (ONLY 69/96)
Possible selection:
default: 8°C
The view of boiler difference setting (not possible to change).
Technical instructions REGULATION PelTec / PelTec-lambda
Temperatures (DHW || BUF -- IHC)
27