Centrometal PelTec Series Technical Instructions page 60

Chimney sweeper
5.3.2 MIN. BOILER TEMPERATURE
The factory set temperature that must be achieved to start measuring (except for conditions that
can be changed - boiler power and time).
- the minimum boiler temperature
5.3.3 TIME
Possible selection:
Factory: 600 sec
Minimum: 600 sec
Maximum: 3600 sec
After the set parameters are met there is min. time to stabilize the flame before measuring. This
time begins to run when the boiler is on selected power Dx and minimum boiler temperature.
After the expiration of this time the text of the counter becomes green (1) and only then is
allowed to start measuring.
60
: min. 60°C
00:00:00
00:09:59
Technical instructions REGULATION PelTec / PelTec-lambda
- it can't be changed
00:00:00:
00:09:59
00:10:01