Centrometal PelTec Series Technical Instructions page 6

Symbols, Configuration symbols
Pellet level in the tank (3 levels)
Empty
- error
CONFIGURATION SYMBOLS
120°C
O2=8%
80°C
1700
15k
The following symbols are shown on the display configuration
(page 4, mark 20 in the figure)
Pump (when pump is working symbol is rotating, otherwise idle)
The pump has a request for work (next to the pump symbol bright yellow square when
the consumer given the demand for work the pump, the pump does not work if you have
not met all the conditions for work, for example. low temp. in the boiler, otherwise the
pump normally works)
6
Half-empty
- warning
30%
0%
Technical instructions REGULATION PelTec / PelTec-lambda
Position of burner grate
Full
60°C
Closed
(ready to work)
0%
Open
(cleaning)
100%
20
05:08
OFF