Centrometal PelTec Series Technical Instructions page 47

2.1 MAX. BOILER TEMP. (ONLY 69/96)
Possible selection:
default: 75°C
Minimum: 75°C
Maximum: 80°C
The possibility of setting maximum boiler temperature.
2.2 DIFF. BOILER (ONLY 69/96)
Possible selection:
default: 8°C
The view of boiler difference setting (not possible to change).
2.3 / 2.4 MIN. Tcro DHW (ONLY 69/96)
Possible selection:
default: -°C
Minimum: -°C
Maximum: -°C
The view of set temperature of the minimum crossover temperature for DHW (always is set the same as DHW
temperature).
2.3 MIN. Tcro (ONLY 69/96)
Possible selection:
default: 70°C
Minimum: 45°C
Maximum: 70°C
The possibility to set hydraulic crossover minimum temperature.
Technical instructions REGULATION PelTec / PelTec-lambda
Temperatures (CRO -- DHW
47