Centrometal PelTec Series Technical Instructions page 23

2. TEMPERATURE (CONFIGURATION BUF--IHC)
2.1 / 2.3 BUFFER TANK TEMP.
Possible selection:
default: 80°C
Minimum: 40°C
Maximum: 85°C
The possibility of setting the desired temperature of the accumulation tank.
2.2 / 2.4 MIN. BUF. TANK TEMP.
Possible selection:
default: 20°C
Minimum: 5°C
Maximum: 64°C
The possibility of setting the minimum temperature of the accumulation tank.
2.3 / 2.5 DIFF. BUF. TANK TEMP.
Possible selection:
default: 10°C
Minimum: 5°C
Maximum: 30°C
The possibility of setting the accumulation tank start difference.
2.4 / 2.6 DIFF. STOP BUFF. TANK
Possible selection:
default: 10°C
Minimum: 5°C
Maximum: 30°C
The possibility of setting the accumulation tank stop difference.
2.1 MAX. BOILER TEMP. (ONLY 69/96)
Possible selection:
default: 75°C
Minimum: 75°C
Maximum: 80°C
The possibility of setting maximum boiler temperature.
Technical instructions REGULATION PelTec / PelTec-lambda
12-48
Temperatures (BUF -- IHC)
69/96
23