Centrometal PelTec Series Technical Instructions page 43

TEMPERATURE (KONFIGURACIJA AKU--IKG)
2. TEMPERATURE
2.1 / 2.3 BUFFER TANK TEMP.
Possible selection:
default: 80°C
Minimum: 40°C
Maximum: 85°C
The possibility of setting the desired temperature of the accumulation tank.
2.2 / 2.4 MIN. BUF. TANK TEMP.
Possible selection:
default: 20°C
Minimum: 5°C
Maximum: 64°C
The possibility of setting the minimum temperature of the accumulation tank.
2.3 / 2.5 DIFF. BUF. TANK TEMP.
Possible selection:
default: 10°C
Minimum: 5°C
Maximum: 30°C
The possibility of setting the accumulation tank start difference.
2.4 / 2.6 DIFF. STOP BUF. TANK
Possible selection:
default: 5°C
Minimum: 3°C
Maximum: 30°C
The possibility of setting the accumulation tank stop difference.
2.1 MAX. BOILER TEMP. (ONLY 69/96)
Possible selection:
default: 85°C
Minimum: 80°C
Maximum: 90°C
The possibility of setting maximum boiler temperature.
Technical instructions REGULATION PelTec / PelTec-lambda
S ( CONFIGURATION
12-48
Temperatures (BUF -- IHC 2x)
BUF--IHC 2x)
69/96
43