Centrometal PelTec Series Technical Instructions page 20

Temperatures (DHW II BUF)
2. TEMPERATURE (CONFIGURATION DHW || BUF)
2.1 / 2.4 BUFFER TANK TEMP.
Possible selection:
default: 80°C
Minimum: 40°C
Maximum: 85°C
The possibility of setting the desired temperature of the accumulation tank.
2.2 / 2.5 MIN. BUF. TANK TEMP.
Possible selection:
default: 20°C
Minimum: 5°C
Maximum: 64°C
The possibility of setting the minimum temperature of the accumulation tank.
2.3 / 2.6 DIF. BUF. TANK TEMP.
Possible selection:
default: 10°C
Minimum: 5°C
Maximum: 30°C
The possibility of setting the accumulation tank start difference.
2.4 / 2.7 DIF. STOP BUFF. TANK TEMP.
Possible selection:
default: 10°C
Minimum: 5°C
Maximum: 30°C
The possibility of setting the accumulation tank stop difference.
20
12-48
Technical instructions REGULATION PelTec / PelTec-lambda
69/96