Derating Of The Dq 4X24Vdc/2A Hs - Siemens SIMATIC ET 200SP Manual

7.2

Derating of the DQ 4x24VDC/2A HS

Maximum permitted output current depending on the frequency
The figure below shows the maximum permitted output current per channel depending on
the frequency.
You must take this characteristic into consideration for all operating modes of the module.
Figure 7-1
Maximum permitted output current depending on the ambient temperature
In addition to the dependency of the maximum permitted output current on the frequency,
you also have to take into consideration the dependency on the ambient temperature.
Depending on the configured operating mode, there is an additional "DQ" or "PWM"
derating. The table below shows the dependencies of derating version and module operating
mode:
Table 7- 1 Additional derating versions of the DQ 4×24VDC/2A HS
Derating version
DQ derating
PWM derating
Digital output module DQ 4x24VDC/2A HS (6ES7132-6BD20-0DA0)
Manual, 06/2018, A5E32855695-AC
Derating of the DQ 4×24VDC/2A HS depending on the frequency
Normal operation Valve
control in
normal operation
x
-
Operating mode
Pulse width
modulation
- -
x x
Technical specifications
7.2 Derating of the DQ 4x24VDC/2A HS
Oversampling
x
-
Cam
control
-
x
95