Siemens SIMATIC ET 200SP Manual page 86

Feedback bit
STS_CAM
STS_DQ
Digital output module DQ 4x24VDC/2A HS (6ES7132-6BD20-0DA0)
Manual, 06/2018, A5E32855695-AC
Notes
Signal status of the cam tracks
Bit 0 for channel 0: 0 = Cam track off, 1 = Cam track on
•
Bit 1 for channel 1: 0 = Cam track off, 1 = Cam track on
•
Bit 2 for channel 2: 0 = Cam track off, 1 = Cam track on
•
Bit 3 for channel 3: 0 = Cam track off, 1 = Cam track on
•
Bits 4 to 7: Reserved
•
Signal status of the digital outputs
Bit 0 for channel 0: 0 = DQ channel off, 1 = DQ channel on (pulse output is possible)
•
Bit 1 for channel 1: 0 = DQ channel off, 1 = DQ channel on (pulse output is possible)
•
Bit 2 for channel 2: 0 = DQ channel off, 1 = DQ channel on (pulse output is possible)
•
Bit 3 for channel 3: 0 = DQ channel off, 1 = DQ channel on (pulse output is possible)
•
Bits 4 to 7: Reserved
•
Cam control operating mode
6.3 Interrupts/diagnostics alarms
85