Siemens SIMATIC ET 200SP Manual page 17

Product overview
2.1 Properties
Configuration options
You can configure the module with STEP 7 or with a GSD file. When you configure the
module using a GSD file, you can find the configuration under various short
designations/module names. Depending on the configuration, additional/different addresses
are assigned in the process image output/input.
The following configurations are possible:
Table 2- 3 Configuration options with GSD file of the DQ 4×24VDC/2A HS
Configuration
1 x 4-channel normal operation
without value status
1 x 4-channel normal operation
with value status
1 x 4-channel with pulse width
modulation
1 x 4-channel with oversampling
1 x 4-channel with
cam control and MtM
Value status (quality information, QI)
The value status is always activated for the following module names in the GSD file:
● DQ 4×24VDC/2A HS QI (...)
● DQ 4×24VDC/2A HS MCC MtM (...)
Evaluating the value status
If you enable the value status function for the digital module, a byte in the input address
space is additionally assigned. Bits 0 to 3 of this byte are each assigned to one channel.
They provide information about the validity of the digital value.
● Bit = 1: No error is present on the channel.
● Bit = 0: Channel is disabled or there is an error in the module.
If an error occurs on a channel of this module, the value status for all channels is 0.
16
Short designation/module
name in the GSD file
DQ 4×24VDC/2A HS
DQ 4×24VDC/2A HS QI
DQ 4×24VDC/2A HS
PWM
-
DQ 4×24VDC/2A HS
MCC MtM
DQ 4×24VDC/2A HS
MCC (16 Byte) MtM
DQ 4×24VDC/2A HS
MCC (6 Byte) MtM
Configuration software, e.g. STEP 7
Can be integrated
in the hardware PROFINET IO
catalog of STEP 7
(TIA Portal) V13
SP1 or higher
x
x
x
x
-
-
-
Digital output module DQ 4x24VDC/2A HS (6ES7132-6BD20-0DA0)
GSD file GSD file
PROFIBUS DP
x x
x -
x x
- -
x -
x -
x -
Manual, 06/2018, A5E32855695-AC