Siemens SIMATIC ET 200SP Manual page 119

Parameter data records
A.4 Parameter assignment and structure of the parameter data record for cam control operating mode
Module header information
The figure below shows the structure of the module header information.
Figure A-21
Module parameter block
The figure below shows the structure of the module parameter block for channels 0 to 3.
Enable a parameter by setting the corresponding bit to "1".
Figure A-22
Internal layout block
The figure below shows the structure of the internal layout block.
Figure A-23
118
Module header information in cam control operating mode
Module parameter block in cam control operating mode
Internal layout block in cam control operating mode
Digital output module DQ 4x24VDC/2A HS (6ES7132-6BD20-0DA0)
Manual, 06/2018, A5E32855695-AC