Siemens SIMATIC ET 200SP Manual page 101

Parameter data records
A.1 Parameter assignment and structure of the parameter data record for DQ operating mode
Module header information
The figure below shows the structure of the module header information.
Figure A-3
Module parameter block
The figure below shows the structure of the module parameter block for channels 0 to 3.
Enable a parameter by setting the corresponding bit to "1".
Figure A-4
Channel header information
The figure below shows the structure of the channel header information.
Figure A-5
100
Module header information
Module parameter block
Channel header information
Digital output module DQ 4x24VDC/2A HS (6ES7132-6BD20-0DA0)
Manual, 06/2018, A5E32855695-AC