Drive-Cliq Interfaces X400, X401, X402; Test Points For 1 Mm Test Probes - Siemens SINAMICS S120 Equipment Manual

Motor Modules Chassis-2
7.3 Interface description
7.3.11

DRIVE-CLiQ interfaces X400, X401, X402

Table 7- 9
Connector
Blanking plate for DRIVE-CLiQ interfaces (50 pcs.) Article number: 6SL3066-4CA00-0AA0
7.3.12

Test points for 1 mm test probes

On the connectors X41, X46, X47 and X49 you will find test points for 1 mm test probes on
the sides, see
Figure 7-4
302
DRIVE-CLiQ interfaces X400, X401, X402
PIN Signal name
1 TXP
2 TXN
3 RXP
4 Reserved, do not use
5 Reserved, do not use
6 RXN
7 Reserved, do not use
8 Reserved, do not use
A + (24 V)
B M (0 V)
①
in the following figure.
Test points for 1 mm test probes
Technical specifications
Transmit data +
Transmit data -
Receive data +
Receive data -
24 V power supply
Electronics ground
Air-cooled chassis power units
Manual, 07/2019, 6SL3097-4AE00-0BP9