Siemens SINAMICS S120 Equipment Manual page 243

Attaching the mounting bracket
First, fasten the mounting bracket to the mounting surface of the control cabinet, then to the
fastening points on the Active Line Module.
When mounting, ensure that no additional pressure is applied to the rollers of the Active Line
Module by observing the positions of the elongated holes (11 mm x 15 mm).
Tighten the M10 screws to a torque of 50 Nm.
Figure 5-48 Attaching the mounting bracket (diagram showing an example)
Air-cooled chassis power units
Manual, 07/2019, 6SL3097-4AE00-0BP9
Line Modules
5.5 Active Line Modules Chassis-2
241