Siemens SINAMICS S120 Equipment Manual page 415

You must take into account the following specifications when using a SINAMICS S120
Chassis drive line-up:
● Ventilation clearance
● Cabling
● Air guidance
Table 10- 4 Ventilation clearances for the components
Component
Basic Line Module
Active Interface Module
Active Interface Module
Active Interface Module
Active Interface Module
Chassis-2
Smart Line Module
Active Line Module
Active Line Module
Chassis-2
Motor Module
Motor Module Chassis-2
The clearances refer to the area around the ventilation slots on the front cover.
1)
The clearances refer to the area around the air intake of the fan and the upper ventilation slots in the lateral cover.
2)
Note
Notes on the dimensions
The dimensions refer to the outer edges of the devices.
Dimension drawings are available in the relevant chapters.
Air-cooled chassis power units
Manual, 07/2019, 6SL3097-4AE00-0BP9
Frame size Clearance at the
front
[mm]
FB, GB, GD 40
1)
FI 40
1)
GI 50
1)
HI, JI 40
1)
FS2, FS4 20
1)
GX, HX, JX 40
1)
FX, GX, HX, 40
1)
JX
FS2, FS4 0
FX, GX, HX, 40
1)
JX
FS2, FS4 0
Clearance Clearance (be-
(above)
[mm]
250 150
250 150
250 150
250 0
70 0
250 150
250 150
200 0
250 150
200 0
Cabinet design and EMC
10.3 Cabinet air conditioning
Clearance at the
low) side
[mm] [mm]
0
0
0
0
0
0
0
80 (clearance to
the right)
2)
0
80 (clearance to
the right)
2)
413