Siemens SINAMICS S120 Equipment Manual page 245

Attaching the PE connections
The shielding connections are used to connect the cable shields of the shielded signal
cables on the Active Line Module.
Attach the support plate for the shield connections at the intended position. You can break
off individual parts from the 6-part support plate corresponding to your specific requirements,
torque 3 Nm.
Figure 5-50
Air-cooled chassis power units
Manual, 07/2019, 6SL3097-4AE00-0BP9
Attaching the PE connections
Line Modules
5.5 Active Line Modules Chassis-2
243