Volume Screen - Extron electronics TouchLink TLP 700MV User Manual

The screen may need a high level of backlighting to read the screen when ambient lighting is
high. With low ambient lighting, the backlighting should also be low.
Auto Backlight provides a suitable amount of backlighting that is automatically calculated
from the amount of ambient light detected by the light detector.
When Auto Backlight is set to Off, the Backlight option allows the backlighting to be set
manually from 0 to 100%. Press the Down or Up buttons to highlight the Backlight options
and use the volume control knob or press the Down or Up buttons to adjust the backlighting.
The current value is shown above the buttons.
When Auto Backlight is set to On, changing the percentage of Backlight
NOTE:
does not affect the amount of backlighting.
LED Backlight lights the ten buttons next to the screen.
Wake on Motion activates the panel from Sleep mode when motion is detected near the
unit.
Use the on-screen buttons to toggle the Auto Backlight, LED Backlight, or Wake on
Motion options between Off and On.

Volume Screen

Figure 11. Volume Screen
Click on the Down or Up buttons to highlight one of the adjustable audio features. Use the
Down and Up buttons or the volume control knob to adjust:
Master volume (between 0 and 255) sets the maximum volume for all the other sound
volume settings. For example, if the master volume is set to 200 (approximately 80% of
maximum), even when the Line In volume is set to 255 (maximum), it is only equivalent to
80% of maximum.
Click (between 0 and 255) sets the volume for audible feedback that accompanies events
such as a side button or screen button being pressed.
Sounds (between 0 and 255) sets the volume of audio from an audio file playback.
Line In (between 0 and 255) sets the volume of the audio signal received through the line
in from and Extron MTP transmitter.
TLP 700MV and TLP 700TV • On-screen Menus 13