Replacing Button Labels - Extron electronics TouchLink TLP 700MV User Manual

Replacing Button Labels

The illustration below shows how to replace the button labels on the TLP 700MV. Although,
the buttons on the TLP 700TV are slightly smaller and the labels are different dimensions,
the procedure for replacing labels on either model is the same. To change the translucent
button labels for either model, follow these steps, as shown in the diagram:
Figure 48.
1.
2.
3.
4.
5.
Button Label
Removing Buttons
Pull off the clear plastic lens covering the button using the thumb and forefinger.
If necessary, remove the existing label. It may be inside the lens or the top of the button
plunger.
Place the new label inside the plastic lens. Ensure that the label and the lens are in the
correct orientation.
Align the plastic lens with the button plunger and firmly snap it into place.
Repeat steps 1 to 4, as needed, to relabel all the buttons.
Pull the lens from the button
and add the label.
X T
T E
Clear Lens
TLP 700MV and TLP 700TV • Button Labels 45