Panel Features; Tlp 700Mv Front Panel Features And Operations - Extron electronics TouchLink TLP 700MV User Manual

Panel Features

This section describes:

TLP 700MV Front Panel Features and Operations

TLP 700MV Rear Panel Features and Connections
TLP 700TV Front Panel Features and Operations
TLP 700TV Rear Panel Features and Connections
TLP 700TV Base Features
TLP 700MV Front Panel Features and Operations
Figure 2.
A
B
C
D
E
F
TLP 700MV Front Panel
Buttons — These ten backlit push-buttons (five on either side of the screen) can be
configured to execute user-defined functions using the Extron Global Configurator (see
Using Global Configurator
Software on page 44).
Motion Sensor — Is capped with a small Fresnel lens that focuses light onto the
sensor. When no motion has been detected for a user-defined period of time, the unit
goes into sleep mode. When motion is detected in the vicinity of the panel, the screen
display is restored and all buttons are active.
Encoder Knob — Controls the volume or it can be configured for other functions.
Light Sensor — Monitors the level of ambient light and adjusts the screen brightness
and button backlighting.
LCD screen — Has an 800 x 480 resolution with a touch overlay. A graphic user
interface is designed using the Extron
text, or icons on the screen (page 22). These can be configured for a range of user-
defined functions, using the Extron
Speaker — A single 2 watt speaker provides audible feedback for the user.
on page 27 and Using the Button-Label Generator
GUI Configurator
Global Configurator
TLP 700MV and TLP 700TV • Panel Features
software to display buttons,
software (page 26).
4