Volume Screen - Extron electronics TLP 1000MV User Manual

The sleep timer determines how long the panel will be inactive before it enters Sleep
mode, when the screen goes dark to save power. The time can be changed from
50,000
above the buttons.
The screen may need a high level of backlighting for readability when ambient lighting is
high. With low ambient lighting, the backlighting should be low.
Auto Backlight provides a suitable amount of backlighting that is automatically
calculated from the amount of ambient light detected by the light detector.
The Backlight control sets the backlighting manually from
Backlight is set to
NOTE:
Wake on Motion activates the panel from Sleep mode when motion is detected near the
unit. Use the on-screen buttons to toggle the Auto Backlight or Wake on Motion options
between

Volume Screen

Figure 14.
Press the
Down
•
•
•
•
seconds (in 10-second increments). The time that is currently selected is shown
.
Off
When Auto Backlight is set to
not affect the amount of backlighting.
and .
Off On
Main
Down
Volume
Time
Down
Network
Video
Down
Down
Exit
Volume Screen
or buttons to highlight one of the adjustable audio features. Use the
Down Up
and buttons to adjust the following settings:
Up
Master volume (between
all the other sound volume settings. For example, if the master volume is set to
(approximately 80 percent of maximum), even when the Line In volume is set to
(maximum), it will only be equivalent to 80 percent of maximum.
Click (between and ; default
0 255
accompanies events such as a screen button being pressed.
Sounds (between and
0 255
file playback.
Line In (between and
0 255
through the line in from an Extron MTP transmitter.
TLP 1000MV and TLP 1000TV • Initial Configuration and Calibration
, changing the percentage of Backlight does
On
Master: 120
Up
Click: 120
Up
Sounds: 120
Up
Line In: 120
Up
and ; default ) sets the maximum volume for
0 255 120
) sets the volume for audible feedback that
120
; default ) sets the volume of audio from any audio
120
; default ) sets the volume of the audio signal received
120
to
0
0 to 100 percent, when Auto
200
255
15