Mounting; Rack Mounting The Tlp 700Mv; Underwriters Laboratories Guidelines For Rack Mounting - Extron electronics TouchLink TLP 700MV User Manual

Mounting

This section outlines the various options for:
•
•
•
•
•
•

Rack Mounting the TLP 700MV

Underwriters Laboratories Guidelines for Rack Mounting

The following Underwriters Laboratories (UL) guidelines are relevant to the safe installation of
these products in a rack:
Elevated operating ambient temperature — If the unit is installed in a closed or multi-
unit rack assembly, the operating ambient temperature of the rack environment may be
greater than room ambient temperature. Therefore, install the equipment in an environment
compatible with the maximum ambient temperature (Tma: +122 °F, +45 °C) specified by
Extron.
Reduced air flow — Install the equipment in the rack so that the equipment gets adequate
air flow for safe operation.
Mechanical loading — Mount the equipment in the rack so that uneven mechanical
loading does not create a hazardous condition.
Circuit overloading — Connect the equipment to the supply circuit and consider the
effect that circuit overloading might have on overcurrent protection and supply wiring.
Give appropriate consideration to the equipment nameplate ratings when addressing this
concern.
Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment.
Pay particular attention to supply connections other than direct connections to the branch
circuit (such as the use of power strips).
Rack Mounting the TLP 700MV
Mount the TLP 700MV in any standard 19-inch equipment rack, using the optional Extron
RM 700M rack mounting kit. Follow the instructions provided with the kit.
Rack Mounting the TLP 700MV
Wall Mounting the TLP 700MV
Wall Mounting the TLP 700MV with a Wallbox
Desktop Mounting the TLP 700TV
Removing the TLP 700TV base for VESA Mounting
VESA mounting the TLP 700TV
TLP 700MV and TLP 700TV • Mounting 33