Configuration Software; Software Overview - Extron electronics TouchLink TLP 700MV User Manual

Configuration
Software
This section of the guide discusses the software and firmware needed to set up the
Touchpanel units:
•
•
•
•
•
•

Software Overview

Designing a graphical user interface (GUI) for the TouchLink Panel takes two steps:
•
•
The touchpanel screen is designed using GUI Configurator either by customizing an existing
template or by designing an entirely new interface. GUI Configurator offers several templates
that are designed to manage control system devices.
After the GUI has been designed on a PC, the project is saved, built, and uploaded to the
TLP unit to verify what it looks like on the screen. It is then imported from the TLP unit to
Global Configurator where control functions are assigned to the text and graphic items in
the layout. After assigning the control functions, the project is rebuilt and uploaded to the
IP Link control interface.
These two programs provide versatility and adaptability for configuration and control of an
AV system as it grows and evolves.
Software Overview
Installing the Software
Updating the Firmware
Using the TouchLink Panel Web Pages
Using GUI Configurator
Using Global Configurator
Design the layout of the text and graphics using
Assign functions to the text and graphics using
TLP 700MV and TLP 700TV • Configuration Software
GUI Configurator (see page 22).
Global Configurator (see page 27).
16