Tlp 700Tv Front Panel Features And Operations - Extron electronics TouchLink TLP 700MV User Manual

B
C

TLP 700TV Front Panel Features and Operations

Figure 6.
A
B
C
D
E
Video Input (see figure 4
or composite video source to the unit, using these two BNC
connectors:
For S-video, connect the Y (luminance) signal to the VID/Y input
and the C (chrominance) signal to the C input.
For composite video, connect the input to the VID/Y input.
Network Connector (see
an Ethernet LAN using a twisted pair cable, terminated with an RJ-
45 connector (see the figure at right). Use a straight-through Ethernet
cable to connect the panel to a switch or router. Use a crossover
cable to connect the panel directly to a computer.
Plug one end of the cable into the RJ-45 socket and the other end
into a network switch, hub, or router that is connected to an Ethernet
LAN or the Internet. An Extron IP Link control interface must also be
connected to the same network domain.
The LAN Port connector (see the figure to the right) has two
LED lights. The Link LED lights green to indicate a good network
connection. The Activity LED blinks yellow when network activity
occurs.
TLP 700TV Front Panel Features
Buttons
Motion sensor
Encoder knob
Light sensor
LCD screen
on page 5) — Connect an S-video
figure 4) — The TLP 700MV connects to
F
Speaker
G Reset button
H
Menu button
I
Reset LED
TLP 700MV and TLP 700TV • Panel Features
Link
LED
LAN
Activity
LED
RJ-45
Port
LAN Port
8