Using the TouchLink Panel Web Pages
As seen
default web pages that can be used to read and change the current settings of the panels.
The web pages can be accessed as follows:
1.
2.
in the previous
section, the TLP 700MV and TLP 700TV TouchLink Panels have
Open your browser and type the IP address of the TLP 700 unit into the address box.
The browser opens the TouchLink Panel Status page, which is read-only and provides
basic information about the model, date and time, and IP settings.
Figure 12.
TLP 700 Status Tab
Click on the Configuration tab and select the System Settings page, which
allows the user to modify information about the IP settings and the date and time
settings. These correspond to the
(see page 13) in the on-screen menus.
Figure 13.
TLP 700 Configuration Tab: System Settings Page
Network
settings (see page 13) and
TLP 700MV and TLP 700TV • Control Software
Time
settings
19