Table of Contents
Advertisement
FIBER METER
When you upgrade the Fiber Meter firmware, all of the test
results you have currently stored are erased. To avoid
losing existing test results, we recommend that you print the
stored test results or upload them to a PC before upgrading
the firmware.
To download a firmware upgrade file from disk:
1. Connect the Fiber Meter to the PC serial port. See
Section A.3.2 for specific instructions.
2. Set the rotary dial on the Main Unit to
EXTENDED FUNCTIONS.
3. Press the up- and down-arrow keys until Download
Firmware is highlighted.
4. Press the ENTER button. Wait until the message
Link Established is shown in the Report Manager's
status bar.
If the status bar continues to display No Communications
Link Established, check the COM port settings. See
Section A.3.1 for specific instructions.
5. Select Firmware Update from the Download
menu.
96
CAUTION
NOTE
Advertisement
Table of Contents
