Set The Test Mode - Black Box Fiber Meter Manual

3.1 Set the Test Mode

The Fiber Meter includes two identical Fiber Meter
handsets. Use these handsets to perform multimode
fiber certification Autotests. This allows you to specify
whether loss measurements are made on each fiber in
one direction (one-way testing—see Figure 3-1) or on
each fiber in both directions (two-way testing—see
Figure 3-2). When running Autotests, one handset is
used as the Main Unit. It controls all of the testing and
stores the test results. The other handset is used as the
Remote Unit.
Figure 3-1. One-way testing.
Figure 3-2. Two-way testing.
CHAPTER 3: Setup
23