The Calibration (CAL) function allows you to set the
Fiber Meter to the cable's index of refraction (IOR) and
set the Autotest power reference. Refer to Chapter 5 for
instructions on setting the Autotest power reference.
I
R
NDEX OF
EFRACTION
Index of refraction (IOR) is a measure of the speed of
light through a fiber. Setting the appropriate IOR value
is important to making accurate multimode fiber length
measurements.
You can set the IOR as follows:
• Use the system-default IOR setting of 1.490.
• Manually input an IOR value, if known. IOR values
are those specified at 1300 nm.
We recommend that you set the IOR each time you test
a cable from a different manufacturer or spool.
Setting the IOR is only necessary when performing Autotest
multimode fiber certification tests that include length
measurements.
4. Calibration
(IOR)
NOTE
CHAPTER 4: Calibration
37