Black Box Fiber Meter Manual page 17

FIBER METER
Selection
AUTOTEST
RESULTS
CAL
SETUP
14
Table 2-1. Rotary dial selections.
Description
Performs the automated testing of a pair of multimode optical
fibers.
Views Autotest reports, prints reports from the Fiber Meter,
and changes the serial settings during printing.
Calibrates the cable index of refraction (IOR) and sets the
Autotest reference power.
Defines each of the basic operational settings for the Fiber
Meter including:
• Test Mode
• Number of Connections
• Number of Splices
• Core Diameter
• Units
• PowerDown
• Backlighting
• Power Frequency
• Baud Rate
• Flow Control
• Date
• Time
• Audible Tones
• Circuit Names
• Company Name
• Reset to Defaults
Each of the SETUP functions has a default value that is
established by the factory. See Chapter 3 for specific
instructions.