Black Box Fiber Meter Manual page 61

Table of Contents

FIBER METER

results identified as TX are measurements made on the

cable connected to the Main Unit's TX port during the

first step of the Autotest.

1. On the Main Unit, press the F4 button or the

ENTER button on the Autotest Summary screen,

any Autotest Loss screen, or any Margin screen.

The Fiber Meter automatically assigns a sequential

report number. You can press the up- and down-

arrows keys to change the report number. See

Figure 5-17.

If desired, you can enter a circuit identifier. See

Section 5.8.

2. Press the ENTER button to save the Autotest

results.

Figure 5-17. Saving Autotest reports.

NOTE

Table of Contents