Set The Number Of Splices - Black Box Fiber Meter Manual

Figure 3-3. Number of connections (for loss budget).
3. The number of connections can be 0 to 99. The
default value is 2. Press the F2 button to decrease
the number of connections. Press the F3 button to
increase the number of connections.

3.3 Set the Number of Splices

1. Set the rotary dial on the Main Unit to SETUP.
2. Press the up- and down-arrow keys until # Of
Splices is highlighted.
3. The number of splices can be 0 to 99. The default
value is 0. Press the F2 button to decrease the
number of connections. Press the F3 button to
increase the number of connections.
CHAPTER 3: Setup
25