Save Autotest Results - Black Box Fiber Meter Manual

2. Highlight the desired cable test standard (see
Figure 5-16).
Figure 5-16. Library of cable test standards.
3. Press the F4 button or the ENTER button.

5.7 Save Autotest Results

Each Fiber Meter can store the results of up to 2000
Autotests (1000 in each handset.) These results can later
be uploaded to a PC or printer. See Chapter 7 for a
description of how to output test results.
Since Autotest performs measurements on two separate
fiberoptic cables, you must assign a circuit identifier to
each cable under test. In addition, each Autotest results
in two reports. When you are using one-way testing, the
Autotest results identified as TX are measurements
made on the cable connected to the Main Unit's TX
port. When you are using two-way testing, the Autotest
CHAPTER 5: Autotest
57