Black Box Fiber Meter Manual page 68

2. Press the up- and down-arrow keys until Power
Meter is highlighted.
3. Press the ENTER button.
4. Select the F3 button, which toggles between 850
and 1300 nm wavelengths (see Figure 6-3).
Figure 6-3. Manual Power Meter mode.
5. Set Fiber Meter Unit B to EXTENDED
FUNCTIONS, select LED Source, then press the
F3 button, which toggles between 850 and
1300 nm wavelengths.
6. Press the F4 button on Unit A to set the 850 nm
reference.
7. Press the F3 button on the Unit A Manual Power
Meter for the 1300 nm wavelength.
CHAPTER 6: Extended Functions
65