Enter A Circuit Identification Name - Black Box Fiber Meter Manual

FIBER METER

5.8 Enter a Circuit Identification Name

To speed up entering circuit identifiers, the Fiber Meter
can be set up to automatically go on to the next circuit
identifier. See Section 3.14 for specific information.
The selection of a circuit ID that has already been
assigned to another stored report will cause the
following warning to appear:
Circuit ID Not Unique.
To enter the next circuit identifier:
1. Press the F1 and F4 buttons on the Main Unit to
move the cursor left or right along the ID line.
2. Press the F2 (previous) or F3 (next) buttons to
enter numeric or alpha characters.
3. Press the ENTER button to save the Autotest
results with the chosen circuit identifier.
60
Figure 5-19. Assignment of circuit ID.