Table of Contents
Advertisement
To view One-Way test results:
1. On the Autotest Summary screen (see Figure 5-9),
press the F2 button on the Main Unit.
The Autotest TX Loss screen displays the loss in
dB at both wavelengths for the cable connected to
the Main Unit's TX port. This screen also shows
the measured length and propagation delay. See
Figure 5-10.
2. Press the F1 button to display the Autotest RX
Loss screen. This screen displays the loss in dB at
both wavelengths for the cable connected to the
Main Unit's RX port. It also shows measured
length and propagation delay. See Figure 5-11.
Figure 5-10. Autotest TX Loss screen.
CHAPTER 5: Autotest
51
Advertisement
Table of Contents
