Changing Performance Modules - Black Box Fiber Meter Manual

FIBER METER
To resume testing after recharging the battery pack,
turn the Fiber Meter on by pressing the Power button.
The information shown in Figure 2-4 appears.
Figure 2-4. Display during charging mode.

2.6 Changing Performance Modules

Each Fiber Meter handset comes with a fiberoptic
performance module that attaches to the top of the unit.
The fiberoptic performance module contains much of
the key optical measurement circuitry that's used during
Fiber Meter operation.
The Fiber Meter is shipped with the fiberoptic
performance module installed. If you need to remove
the module for servicing or for a performance upgrade,
use the following procedure.
18