Change Serial Port Settings - Black Box Fiber Meter Manual

FIBER METER
If no reports were selected, the highlighted report is
deleted.
4. Select one of the following responses:
• Press the F4 button or the ENTER button to
delete the report. After the report is deleted, the
RESULTS menu screen is displayed.
• To cancel the deletion, press the F1 button or the
ESC button. This takes you back to the RESULTS
menu.

7.5 Change Serial Port Settings

The RESULTS function allows you to adjust the
following serial port settings:
• Baud rate for serial output with that of the PC or
printer.
• Flow-control method to control data flow between
the Fiber Meter and the PC or printer.
• Output format for the report.
The data format for serial data is fixed at 8 bits, no parity,
and 1 stop bit (8N1).
80
NOTE
NOTE