Set The Baud Rate; Set The Flow Control - Black Box Fiber Meter Manual

3.9 Set the Baud Rate

Baud Rate matches the serial output of the Fiber Meter
with that of the printer or PC. The default setting is 9600
baud, which is the most common input baud rate for a
serial printer.
1. Set the rotary dial on the Main Unit to SETUP.
2. Press the up- and down-arrow keys until Baud Rate
is highlighted.
3. Press the F2 button to decrease the baud rate.
4. Press the F3 button to increase the baud rate.

3.10 Set the Flow Control

Flow Control determines what method is used to control
data flow between the Fiber Meter and the printer or
PC.
1. Set the rotary dial on the Main Unit to SETUP.
2. Press the up- and down-arrow keys until Flow
Control is highlighted.
CHAPTER 3: Setup
29