Self-Test; Download Firmware; Upload Reports - Black Box Fiber Meter Manual

FIBER METER

6.5 Self-Test

If the Fiber Meter fails to operate as expected or exhibits
inaccurate readings, you should perform a self-test as
described below.
1. Set the rotary dial on the Main Unit to
EXTENDED FUNCTIONS.
2. Press the up- and down-arrow keys until Self Test
is highlighted.
3. Press the ENTER key. The test begins
immediately, and the display screen shows the test
results.
If the self-test fails, make a note of which test failed and
contact Black Box Technical Support at 724-746-5500.

6.6 Download Firmware

You can transfer firmware upgrades to the Fiber Meter
handset using the Report Manager. See the Appendix
for specific instructions.

6.7 Upload Reports

You can upload stored Autotest results to the PC using
the Report Manager. See the Appendix for details.
72