Installation - Alpha ESS SMILE5 AU Installation, Operation & Maintenance Manual

INSTALLATION

Figure 18 Battery Installation – Second Battery Installation
Step 8 To assemble the second (and all other) battery, repeat steps 6 and 7,
respectively.
Figure 19 Inverter Mounting Panel Installation
Step 9 Take out the inverter position plate and the wall bracket and connect them
using the M4 nuts as shown above. Check carefully if everything is tight.
15 16
Step10 Position the wall bracket, the mounting plate of the battery and mark points as
shown above. Remove the wall bracket and drill holes at the marked position on the
wall. (Drill φ12mm)
Figure 21 Wall Bracket Installation - Install the metal expansion bolts
Step11 Knock the metal expansion tube bolts into the wall holes and unscrew the
hexagonal bolts.
Figure 20 Wall Bracket Installation - Drill Holes
Figure 22 Inverter Installation - Wall Bracket
INSTALLATION
M6 Nuts